



CREATIVE FINE
![]() ![]() ![]() ![]() |
Weight: |
220 g/m2 |
Width: |
3.2 M/126” |
Base Fabric: |
100% Polyester |
Coating: |
PA Resin |
Surface: |
Matte |
Ink: |
GCC-130: Latex/ UV/ Eco-Solvent |
Storage: |
70°F (21 °C) / 50% Humidity , original packaging |

Resolution&Saturation: The fine texture surface enables it to clearly present details and meets the requirements of most art reproduction, high level photographic.High color fidelity, enabling the color vividness of pigments to reach 95% – 98% of the theoretical maximum.
Tensile Strength: The base fabric has moderate tensile strength. It will not have problems during normal frame – stretching operations and the production of small-to medium- format pictures.
Angle Cracking: When folded at a 180 – degree angle, very fine cracks may appear, which are difficult to notice without careful observation.
Dimensional Stability: After Latex printing, the substrate undergoes high temperature curing, the dimensional change rate is controlled within 1 %.
Anti – Scratch: After printing with appropriate ink and allowing it to dry completely, scratched with an ordinary fingernail on the surface, the scratch marks are not obvious.
Opacity: Almost completely covers the underlying layer. After being hung on the wall, only under strong light from a specific angle may there be a very slight see – through phenomenon.
Color Fastness:Very good. After 800 hours of standard light exposure testing, the color change △E*ab is between 1 and 2, and fading is not obvious.